70 RB Typical Hardness Pure Zinc Wire 1200 psi 1.6mm / 2.0mm Diameter
PRODUCT OVERVIEW
Pure Zinc is a 99.99% pure zinc wire specifically designed for spraying in arc spray and flame spray systems. It produces a dense, well bonded coating that is ideal for corrosion protection of steel, electrical conductivity, applications and mold making. It is also used as a bond coat when spraying metals onto non-metallic substrates.
TYPICAL DEPOSIT CHARACTERISTICS:
Þ Typical Hardness: 70 RB
Þ Bond Strength: 1200 psi
Þ Deposit Rate: 24 lbs/hr/100A
Þ Deposit Efficiency 70%
Þ Wire Coverage: 0.9 oz/ft2 / mil
Þ Surface Texture * Variable
Þ Machinability Good
* Depends on air pressure used
SURFACE PREPARATION
Surface should be clean, white metal, with no oxides (rust), dirt, grease, or oil on the surface to be coated. Note: It is best not to handle surfaces after cleaning.
Recommended method of preparation is to grit blast with 24 mesh aluminum oxide, rough grind, or rough machine in a lathe.
APPLICATION
Þ Corrosion protection of steel
Þ Capacitors
Þ Mold making
NOMINAL CHEMICAL COMPOSITION (wt%)
Zn 99.99
RECOMMENDED SPRAY PARAMETERS:
| Diameter | Air Pressure | Voltage | Amperage | Standoff |
| .062”, .079”, .125” | *50-70 psi | *21-23 | *100-350 * | *4-8 in (10-20 cm) |
* Parameters are Typical and may vary depending on equipment used. Contact your equipment manufacturer for optimum spray parameters
STANDARD SIZES & PACKAGING:
| Diameter | Packaging |
| 1/16” (1.6mm) 5/64” (1.9mm) 1/8” (.125mm) | 25# LWS 25# LWS 50# COIL |
Product Tags:
|
|
70 RB Typical Hardness Pure Zinc Wire 1200 psi 1.6mm / 2.0mm Diameter Images
|
